5-pipe breeches piece flat pattern
Five pipes of the same diameter meet at one point in a single plane. Each pipe is cut where it meets its neighbours and laid out with one seam.
5 equal round pipes meeting at one point, their axes in one plane, each cut where it meets the others.
Sizes you enter
- Diameter (D): Across each pipe, on the surface chosen under Sheet.
- Pipe length (L): From the meeting point to the open end, along each pipe.
- Angle 1 (A1): From pipe 1 to pipe 2, anticlockwise, pipe 1 pointing down.
- Angle 2 (A2): From pipe 2 to pipe 3, anticlockwise.
- Angle 3 (A3): From pipe 3 to pipe 4, anticlockwise.
- Angle 4 (A4): From pipe 4 to pipe 5, anticlockwise.
What you get
The exact flat pattern of the part, worked out for the sheet thickness measured on the inside, the mean or the outside, with numbered press lines, the part in 3D, its weight and cutting length, and a DXF for laser, plasma or waterjet cutting (STEP as well).