Offset rectangle to rectangle transition (offset duct reducer)
The smaller rectangle is shifted along the length, the width or both, while staying parallel to the base. Typical for offset hopper outlets and duct reducers that must keep one side flat.
Rectangle to rectangle with the top moved off centre; the top stays parallel to the base.
Sizes you enter
- Base width (W): Shorter side of the base.
- Base length (L): Longer side of the base.
- Top width (w): Top side along W.
- Top length (l): Top side along L.
- Height (H): Vertical distance from base to top.
- Top offset along the length (X): Moves the top centre along L. 0 = centred.
- Top offset along the width (Y): Moves the top centre along W. 0 = centred.
- Base corner radius (R): 0 = sharp corners.
- Top corner radius (r): 0 = sharp corners.
What you get
The exact flat pattern of the part, worked out for the sheet thickness measured on the inside, the mean or the outside, with numbered press lines, the part in 3D, its weight and cutting length, and a DXF for laser, plasma or waterjet cutting (STEP as well).