Rectangular tube flat pattern, top and base cut at angles

A rectangular tube folded from one sheet, cut by sloping planes at both ends, shortest on the left. Give the length, the width, the height at the centre and the angle of each cut.
A rectangular tube folded from one sheet, cut by planes at angles at the top and at the base.
Sizes you enter
- Length (L): Across the front, the way the cut slopes, on the surface chosen under Sheet.
- Width (W): From front to back, on the surface chosen under Sheet.
- Height at the centre (H): Along the centre line, from where the base cut crosses it to where the top cut does.
- Cut angle (A): The top cut against the base, seen from the front: low on the left, rising to the right. 0 = square.
- Base cut angle (B): The base cut against a square end: high on the left, falling to the right. 0 = square.
What you get
The exact flat pattern of the part, worked out for the sheet thickness measured on the inside, the mean or the outside, with numbered press lines, the part in 3D, its weight and cutting length, and a DXF for laser, plasma or waterjet cutting (STEP as well).
How the pattern is developed
Flat plates. The part is made of flat plates joined at their edges. Each plate is drawn at its true shape with the bend or seam lines marked, so the plates can be cut and folded or welded without measuring on the part.
Where it is used
Rectangular ducts and box sections folded from one sheet, square or cut at an angle where they pass a pitched roof or meet a sloping face.
Worked example
Rectangular tube, Top and base cut at Length 400 mm, Width 250 mm, Height at the centre 500 mm, Cut angle 30°, Base cut angle 20°, sheet thickness 0 (sizes on the mean surface), one part, seam on a corner, 24 press lines:
| Length and width (mean) | 400 mm × 250 mm |
|---|---|
| Perimeter (mean) | 1,300 mm |
| Shortest and longest line | 311.74 mm and 688.26 mm |
| Pattern size | 1,300 × 688.26 mm |
| Area (bbox) | 0.8947 m² |
| Press lines | 3 |
| Parts | 1 |
Change any size on the page and the pattern, the press lines and these figures follow at once.
Questions
What sizes are needed to unfold a rectangular tube, Top and base cut?
The length (L), width (W), height at the centre (H), cut angle (A), base cut angle (B), plus the sheet thickness and whether the sizes are measured on the inside, the mean surface or the outside. Unfoldo checks the sizes as they are typed and says which one does not make a part.
How big is the flat pattern of a rectangular tube, Top and base cut?
It depends on the sizes. At Length 400 mm, Width 250 mm, Height at the centre 500 mm, Cut angle 30°, Base cut angle 20° the pattern is 1,300 × 688.26 mm, in 1 part, with 3 press lines. Each pattern comes with its own size frame and area.
Where can the seams go, and can it be cut in parts?
The rectangular tube, Top and base cut can be laid out as: one part, seam on a corner; two parts, seams on opposite corners. Several parts are drawn side by side and numbered, ready to nest.
Does it allow for the sheet thickness?
Yes. Enter the thickness and say whether each size is on the inside, the mean surface or the outside; the pattern is worked out on the mean surface, the length that does not change when the sheet is rolled or pressed.
What files does Unfoldo give for a rectangular tube, Top and base cut?
A DXF with true arcs for laser, plasma and waterjet cutting software (the cut profile on one layer, the press lines and their numbers on others), a STEP model of the part, and a PDF shop drawing with the sizes and the true lengths of the press lines.
How accurate is it?
Arcs in the DXF are true arcs, and curves that are not arcs stay within 0.005 mm of the exact curve.
Is it free?
The pattern can be seen and tried free, without an account. The exact DXF, STEP and the tables come with Pro ($29 a month), the team plan or a 30-day pass ($19); every new account gets 15 days of Pro free, no card needed.