Rectangular tube flat pattern, folded from one sheet

Rectangular tube, Square ends: the partRectangular tube, Square ends: its flat pattern with the press lines
Rectangular tube, Square ends: the part and its flat pattern (the press lines dashed), at the page's default sizes.

A rectangular tube or box duct folded from one sheet at its four corners, the seam on a corner. Give the length, the width and the height; the pattern comes in one part or in two, with the bend lines.

A rectangular tube folded from one sheet, square at the ends.

Sizes you enter

What you get

The exact flat pattern of the part, worked out for the sheet thickness measured on the inside, the mean or the outside, with numbered press lines, the part in 3D, its weight and cutting length, and a DXF for laser, plasma or waterjet cutting (STEP as well).

How the pattern is developed

Flat plates. The part is made of flat plates joined at their edges. Each plate is drawn at its true shape with the bend or seam lines marked, so the plates can be cut and folded or welded without measuring on the part.

Where it is used

Rectangular ducts and box sections folded from one sheet, square or cut at an angle where they pass a pitched roof or meet a sloping face.

Worked example

Rectangular tube, Square ends at Length 400 mm, Width 250 mm, Height 600 mm, sheet thickness 0 (sizes on the mean surface), one part, seam on a corner, 24 press lines:

Length and width (mean)400 mm × 250 mm
Perimeter (mean)1,300 mm
Pattern size1,300 × 600 mm
Area (bbox)0.7800 m²
Press lines3
Parts1

Change any size on the page and the pattern, the press lines and these figures follow at once.

Questions

What sizes are needed to unfold a rectangular tube, Square ends?

The length (L), width (W), height (H), plus the sheet thickness and whether the sizes are measured on the inside, the mean surface or the outside. Unfoldo checks the sizes as they are typed and says which one does not make a part.

How big is the flat pattern of a rectangular tube, Square ends?

It depends on the sizes. At Length 400 mm, Width 250 mm, Height 600 mm the pattern is 1,300 × 600 mm, in 1 part, with 3 press lines. Each pattern comes with its own size frame and area.

Where can the seams go, and can it be cut in parts?

The rectangular tube, Square ends can be laid out as: one part, seam on a corner; two parts, seams on opposite corners. Several parts are drawn side by side and numbered, ready to nest.

Does it allow for the sheet thickness?

Yes. Enter the thickness and say whether each size is on the inside, the mean surface or the outside; the pattern is worked out on the mean surface, the length that does not change when the sheet is rolled or pressed.

What files does Unfoldo give for a rectangular tube, Square ends?

A DXF with true arcs for laser, plasma and waterjet cutting software (the cut profile on one layer, the press lines and their numbers on others), a STEP model of the part, and a PDF shop drawing with the sizes and the true lengths of the press lines.

How accurate is it?

Arcs in the DXF are true arcs, and curves that are not arcs stay within 0.005 mm of the exact curve.

Is it free?

The pattern can be seen and tried free, without an account. The exact DXF, STEP and the tables come with Pro ($29 a month), the team plan or a 30-day pass ($19); every new account gets 15 days of Pro free, no card needed.

Other variants

More in Hoppers, chutes & pyramids