Reducing breeches with body, unequal ends
Each cone branch has its own end diameter, length and angle, for a Y-piece feeding two different pipe sizes. The body and each branch are cut as one piece.
A round body with two cone branches meeting at one point on its centre line; body and branches each one piece.
Sizes you enter
- Body diameter (D): Across the body, on the surface chosen under Sheet.
- Body height (H): From the open end up to where the centre lines meet.
- Left end diameter (d1): Across the left branch end.
- Left length (L1): From where the centre lines meet to the left end, along its centre line.
- Left branch angle (A1): Left centre line from upright.
- Right end diameter (d2): Across the right branch end.
- Right length (L2): From where the centre lines meet to the right end, along its centre line.
- Right branch angle (A2): Right centre line from upright.
What you get
The exact flat pattern of the part, worked out for the sheet thickness measured on the inside, the mean or the outside, with numbered press lines, the part in 3D, its weight and cutting length, and a DXF for laser, plasma or waterjet cutting (STEP as well).