Reducing breeches with angled tops (reducing Y-branch)
A round base divides into two smaller round branches, each end cut square to its own centre line so pipes can be fitted straight on. Made from two pieces with the seams in the middle.
A round base splitting into two smaller round branches, each top square to its centre line; 2 pieces.
Sizes you enter
- Base diameter (D1): Across the base, on the surface chosen under Sheet.
- Top diameter (D2): Across each top, on the surface chosen under Sheet.
- Centre-line length (L): From the base centre to each top centre, in the front view.
- Angle between branches (A): Between the two centre lines.
- Offset (Y): Top centres set back from the base centre, seen from above (0 = in line).
What you get
The exact flat pattern of the part, worked out for the sheet thickness measured on the inside, the mean or the outside, with numbered press lines, the part in 3D, its weight and cutting length, and a DXF for laser, plasma or waterjet cutting (STEP as well).