Tapered segmented bend at any angle (reducing elbow)
The reducing segmented elbow for any bend angle. Each conical segment is developed on its own, and the seams can be staggered or placed on the inside or outside of the bend.
Round duct turned through any angle by conical segments, narrowing from the large end to the small end.
Sizes you enter
- Large end diameter (D1): Across the duct at the start of the bend, on the surface chosen under Sheet.
- Small end diameter (D2): Across the duct at the end of the bend, on the surface chosen under Sheet.
- Centre-line radius (R): From the bend centre to the duct centre line.
- Bend angle (A): How far the duct turns, more than 0° up to 180°.
- Number of segments (n): All segments, the two half end segments included.
What you get
The exact flat pattern of the part, worked out for the sheet thickness measured on the inside, the mean or the outside, with numbered press lines, the part in 3D, its weight and cutting length, and a DXF for laser, plasma or waterjet cutting (STEP as well).