Rectangle to ellipse transition with angled top
A rectangular base with rounded corners to a true ellipse top that is tilted to the base and can be moved off centre. Height is measured to the centre of the top.
Rectangular base with rounded corners to a true ellipse top that is tilted, and may be moved off centre.
Sizes you enter
- Base width (W): Shorter side of the base.
- Base length (L): Longer side of the base.
- Top length (l): Length of the ellipse (its long axis), along L.
- Top width (w): Width of the ellipse (its short axis).
- Height to top centre (H): From the base to the centre of the ellipse top.
- Top angle (α): Angle between the top and the base, seen from the front: the left side rises.
- Top offset along the length (X): Moves the ellipse centre along L. 0 = centred.
- Top offset along the width (Y): Moves the ellipse centre along W. 0 = centred.
- Base corner radius (R): 0 = sharp corners.
What you get
The exact flat pattern of the part, worked out for the sheet thickness measured on the inside, the mean or the outside, with numbered press lines, the part in 3D, its weight and cutting length, and a DXF for laser, plasma or waterjet cutting (STEP as well).