Pipe to cone: cone pattern for an upright branch
A round pipe standing vertically on a cone, such as an outlet on a conical roof or hood. The cone is developed flat with the hole for the branch.
A round branch standing upright (square to the base) on a cone, anywhere on it; the pattern is the cone with its hole.
Sizes you enter
- Base diameter (D): Across the cone's base, on the surface chosen under Sheet.
- Top diameter (d): Across the cone's top, on the surface chosen under Sheet.
- Height (H): From the base to the top.
- Branch diameter (Db): Across the branch: the hole is cut to this size.
- Branch position (X): From the cone's centre line out to the branch's.
- Offset (Z): The branch's centre line to the side (0 = straight out from the cone's), seen from above.
What you get
The exact flat pattern of the part, worked out for the sheet thickness measured on the inside, the mean or the outside, with numbered press lines, the part in 3D, its weight and cutting length, and a DXF for laser, plasma or waterjet cutting (STEP as well).