Two laterals along a pipe: branch patterns
Two equal branches leaning in opposite directions along the trunk, in one plane, so they meet each other on the trunk. Each branch is cut to fit the trunk and its neighbour.
Two equal round branches into a round trunk, leaning opposite ways along it in one plane; the patterns are the two branches.
Sizes you enter
- Trunk diameter (Dt): Across the trunk, on the surface chosen under Sheet.
- Branch diameter (Db): Across each branch, on the surface chosen under Sheet.
- Branch length (L): Along each branch's centre line, from where it meets the trunk's to the open end.
- Left angle (B1): Between the left branch's centre line and the trunk's (90° = square).
- Right angle (B2): Between the right branch's centre line and the trunk's (90° = square).
What you get
The exact flat pattern of the part, worked out for the sheet thickness measured on the inside, the mean or the outside, with numbered press lines, the part in 3D, its weight and cutting length, and a DXF for laser, plasma or waterjet cutting (STEP as well).